67-48-1-manufacture,factory,supplier from China

(Total 24 Products for 67-48-1)
Products Description of Choline chloride CAS#67-48-1Choline chloride was developed by the Agricultural Technology Institute of the Ministry of Agriculture, Forestry and Fisheries of Japan in 1964, and registered as a plant growth regulator in 1987. It also became vitamin B4. Common choline chlorides on the market are divided into plant-carrier choline chloride and white carbon black (silicon dioxide) as a carrier choline chloride. my country's production is about 400,000 tons, accounting for more than 50% of the global production capacity.
Contacter maintenant
Products Description of Octamethylcyclotetrasiloxane CAS#556-67-2Octamethylcyclotetrasiloxane, referred to as D4, is a colorless, transparent or milky white liquid, flammable and odorless.
Contacter maintenant
Products Description of Hexachloroethane CAS#67-72-1Colorless needle-shaped orthorhombic crystals with a camphor-like aroma.
Contacter maintenant
Products Description of GALDEN (TM) HT70 CAS#69991-67-91. Compared with hydrocarbon lubricants, perfluoropolyether lubricants have basically similar molecular structures.
Contacter maintenant
Products Description of Eucalyptus oil CAS#8000-48-4Eucalyptus oil is one of the most commonly used essential oils. With the increasing popularity of candies and chewing gum, one of the main uses of eucalyptus oil is as a food additive. Synthetic fragrances have a refreshing and clean appeal.It has a great influence on the cosmetic industry (such as toothpaste and oral hygiene products) and other household cleaning products industry, as well as the fragrance of perfumes.
Contacter maintenant
Products Description of Magnesium oxide CAS#1309-48-4Magnesium oxide is commonly known as magnesia, also known as magnesium oxide. It is a typical alkaline earth metal oxide with the chemical formula MgO. It is a white powder with a melting point of 2852℃, a boiling point of 3600℃ and a relative density of 3.58 (25℃). It is soluble in acid and ammonium salt solutions. It reacts slowly with water to form magnesium hydroxide. It can be dissolved in a carbon dioxide aqueous solution to form magnesium bicarbonate.
Contacter maintenant
Products Description of VANPLAST 202 CAS#61790-48-5White powderVANPLAST 202 Chemical PropertiesBoiling point 1683.39℃[at 101 325 Pa]vapor pressure 0Pa at 25℃Water Solubility 1.714ng/L at 25℃LogP41.08 at 25℃EPA Substance Registry SystemSulfonic acids, petroleum, barium salts (61790-48-5)Factory and Equipment ShowFast delivery timeInventory 2-3 working days New production 7-10 working days
Contacter maintenant
Products Description of Lithium hydride CAS#7580-67-8Lithium hydride, also known as lithium monohydride, is an inorganic compound with the chemical formula LiH. It is the hydride of lithium and is a white crystalline powder. It is insoluble in benzene and toluene, but soluble in ether.
Contacter maintenant
Products Description of Methanol CAS#67-56-1Methanol, also known as "wood alcohol", is an organic compound and the simplest saturated monohydric alcohol. It is a colorless, transparent, flammable, volatile toxic liquid. Ingestion of 5 to 10 ml can cause blindness, and drinking a large amount can lead to death. Methanol is non-corrosive to metals at room temperature (except lead and aluminum) and has a slight alcohol smell.
Contacter maintenant
Products Description of 2,2'-Azobis(2-methylpropionitrile) CAS#78-67-1White columnar crystals or white powdery crystals.
Contacter maintenant
Products Description of 2-Ethylhexanoyl chloride CAS#760-67-8Light-colored transparent liquid with a strong pungent odor, boiling point 67-68°C, flash point 79°C, specific gravity 0.939, acidic pH, soluble in water2-Ethylhexanoyl chloride Chemical PropertiesMelting point <-75°CBoiling point 67-68 °C/11 mmHg (lit.)density 0.939 g/mL at 25 °C (lit.)vapor pressure 0.72 mm Hg ( 67.7 °C)refractive index n20/D 1.433(lit.)Fp 157 °Fstorage temp. Store below +30°C.form clear liquidcolor Colorless to Almost colorlessWater Solubility Rea
Contacter maintenant
Products Description of Hexaammonium molybdate CAS#12027-67-7Ammonium heptamolybdate is an important intermediate product in the molybdenum metallurgical process. It is the main raw material for the production of molybdenum powder, molybdenum wire and molybdenum-based products. It is also used in industries and fields such as chemical and petroleum catalysts, flame retardants, dyes, pigments and trace element fertilizers.
Contacter maintenant
Products Description of Nickel carbonateCAS#3333-67-3Nickel carbonate is a light green crystal at room temperature. It is almost insoluble in water, more soluble in water containing CO2 than pure water, soluble in ammonia water and dilute acid, and insoluble in cold concentrated hydrochloric acid and nitric acid. When strongly heated in the air, it generates oxides. It reacts with ammonium chloride solution to produce CO2 and NH3, leaving nickel chloride (II) solution.Nickel carbonate is an important nickel compound.
Contacter maintenant
Products Description of Kavain CAS#3155-48-4White crystalline powder, soluble in organic solvents such as methanol, ethanol, DMSO, etc., derived from Kava pepper.Kavain Chemical PropertiesMelting point 142-148 °CBoiling point 432.6±45.0 °C(Predicted)density 1.15±0.1 g/cm3(Predicted)storage temp. Amber Vial, -20°C Freezer, Under inert atmospheresolubility Chloroform (Slightly), Ethyl Acetate (Slightly)color Off-White to Pale YellowBRN 177877Stability:Light and Moisture SensitiveInChIInChI=1S/C14H14O3/c1-16-13-9-12(17-14(15)10-13)8-7-11-5-3-2-4-6-11/h
Contacter maintenant
Products Description of 6-Methyluracil CAS#626-48-26-Methyluracil is a colorless crystal. The melting point is 311-312℃, and it has also been reported to be 270-280℃ (decomposition). It is soluble in water, hot ethanol and alkaline solution, and slightly soluble in ether.
Contacter maintenant
Products Description of Palmitoyl chloride CAS#112-67-4Colorless liquid. Melting point 11-12℃, boiling point 12℃, boiling point 199℃ (2.6kPa), 194.5℃ (2.27kPa). Refractive index 1.4512. Miscible with organic solvents, soluble in ether.
Contacter maintenant
Methanol  CAS#67-56-1Methanol is the easiest fatty alcohol. It is a colorless, flammable, worrying liquid with a boiling factor of 64.7°C, a melting factor of -93.90°C, and a relative density of 0.7913. Soluble in water and most natural solvents. Its extreme toxicity can injury the optic nerve. Once swallowed, it can make the eyes blind and even reason death.Methanol has the established residences of a essential aliphatic alcohol.
Contacter maintenant
Products Description of  Piperazinone CAS#5625-67-22-Piperazinone, an organic chemical substance, molecular formula: C4H8N2O.2-Piperazinone Chemical PropertiesMelting point 136-140 °C (lit.)Boiling point 164°C/5mmHg(lit.)density 1.053±0.06 g/cm3(Predicted)storage temp. Keep in dark place,Inert atmosphere,Room temperaturesolubility Chloroformform Crystalline Powderpka15.47±0.20(Predicted)color White to tanSensitive HygroscopicStability:Stable, but may be light and moisture sensitive.
Contacter maintenant
Products Description of Isopropyl alcohol CAS#67-63-0Isopropyl alcohol, also known as fire wine, is the simplest secondary alcohol and one of the isomers of n-propyl alcohol. It is a colorless, flammable liquid with a strong odor, similar to the mixture of ethanol and acetone, but not very odorous. It is soluble in most organic solvents such as water, alcohol, ether, benzene, chloroform, etc. It is miscible with water, alcohol, ether, and can form an azeotrope with water.
Contacter maintenant
Products Description of Para Chloro Phenol (4-Chloro Phenol) CAS#106-48-9Parachlorophenol, also known as 4-chlorophenol, is an organic compound with the chemical formula C6H5ClO. It is a white crystalline powder, slightly soluble in water, easily soluble in ethanol, ether, chloroform, and benzene.
Contacter maintenant
Products Description of DMSO CAS#67-68-5Dimethylsulfoxide (DMSO for short) is a sulfur-containing organic compound. Its English name is Dimethylsulfoxide and its molecular formula is (CH3)2SO. It is a colorless and odorless transparent liquid at room temperature. It is a hygroscopic flammable liquid and has high polarity.
Contacter maintenant
Products Description of Cobalt Acetate CAS#71-48-7Cobalt acetate is a purple-red crystal that is easily deliquescent and is soluble in water, acid and ethanol.Cobalt acetate Chemical PropertiesMelting point 298 °C (dec.)(lit.)density 1.7043g/cm3solubility Aqueous Acid (Slightly), Water (Slightly)form Powdercolor Pale pink to purpleWater Solubility Soluble in water, alcohol, dilute acids and pentyl acetate(tetrahydrate).Sensitive HygroscopicMerck 14,2433Stability:HygroscopicInChIKeyQAHREYKOYSIQPH-UHFFFAOYSA-LLogP-0.285 (est)CAS DataBase Referenc
Contacter maintenant
Products Description of Diethylene Glycol Ethyl Methyl Ether CAS#1002-67-1Diethylene glycol methyl ethyl ether is a chemical.
Contacter maintenant
Products Description of Isopropyl alcohol CAS#67-63-0Isopropyl alcohol is also known as fire wine, dimethyl methanol, 2-propanol, English: isopropylalcohol, the simplest secondary alcohol, and one of the isomers of n-propanol.A colorless, flammable liquid with a strong odor, similar to the smell of a mixture of ethanol and acetone, but not very strong. It is soluble in most organic solvents such as water, alcohol, ether, benzene, chloroform, etc., and can be miscible with water, alcohol, ether, and can form an azeotrope with water.
Contacter maintenant
Relate News
39771-34-1 Introduction4-Amino-2,6-dibromopyridine (CAS#39771-34-1) is a chemical compound that belongs to the pyridine family. It is a pale yellow crystalline solid that is soluble in water and organic solvents. This compound is widely used in the pharmaceutical and agrochemical industries due to its diverse biological activities.
Global Role of Ethylene GlycolThe global supply chain is intricately linked with the production and distribution of ethylene glycol, also known as mono ethylene glycol (MEG) or simply EG, with the chemical formula C2H6O2 and CAS number 107-21-1 . This clear, viscous liquid is a critical component in various industries, from automotive to textiles, and is commonly recognized for its use in glycol antifreeze solutions .Ethylene glycol is predominantly utilized in the manufacturing of polyester and polyurethane plastics, which are essential in the textile industry.
Industrialization of TrehaloseTrehalose is a stable non-reducing disaccharide consisting of two glucose molecules with an α, α, 1, 1-glycosidic bond. Trehalose was originally extracted from the ergot fungus of rye and was subsequently found to be widespread in natural flora, fauna and microorganisms, especially in fungi, algae, mosses and invertebrates. Trehalose is white crystal, a molecule of trehalose contains two molecules of crystal water, soluble in water, glacial acetic acid and hot ethanol, insoluble in ether, acetone.
1. 2024 Production and Sales OverviewBased on the latest available data, the specific global production and sales figures of caustic soda (CAS#1310 - 73 - 2) in 2024 have not been fully compiled yet. However, looking at the situation in China, which is a major player in the global caustic soda market, from January to November 2024, the production of caustic soda (in terms of 100% equivalent) reached 39.805 million tons, showing a year - on - year growth of 5.9%.
lycopene: dark red powder, has the unique smell and taste of lycopene.Lycopene (CAS No.: 502-65-8), dark red powder, has the unique smell and taste of lycopene. The lycopene produced by microbial fermentation mainly uses fermented substrates such as corn steep liquor, soybean meal and starch as the medium, and uses Blake Sleatrispora as the strain. After fermentation, filtration, drying, extraction, crystallization and Manufactured by refining and other processes.The main functions of lycopene are as follows:1. Anti-oxidation, delay aging;2. Improve the body’s immunity;3.
What is Cornmint Oil?Cornmint oil is a colorless or light yellow clear liquid. It has a special refreshing fragrance, which is pungent at the beginning and cool afterwards. After long-term storage, the color becomes darker. It is often used to repel mosquitoes and relieve physical fatigue.Legend has it that the original name of mint comes from Greek mythology. Pluto Hades fell in love with the beautiful Elf Mansi, and Pluto’s wife Persephane was very jealous.
Evening primrose (Eveningprimrose) is a willow leaf vegetable native to North America. It gets its name because its flowers only bloom at night. Its roots, stems and leaves are often used as medicine by European nobles, so it is also known as the emperor’s panacea.Modern research has found that evening primrose oil extracted from evening primrose seeds is rich in GLA (gamma-linolenic acid). GLA is an unsaturated fatty acid, which is an important component of human cell membranes.
Vitamin K is an essential fat-soluble nutrient, and also our body needs it to accomplish healthy and balanced blood coagulation and also other functions. It has 2 forms:Vitamin K1, (phylloquinone) is discovered in green leafy vegetables, veggies and some veggie oils.Vitamin K2, (menaquinone) exists in dairy products, fermented foods and pet products.You can likewise obtain vitamin K supplements, but scientific trials reveal that the vitamin K we extract from food is a lot more effective for our body.
Photoinitiators, also known as photosensitizers or photocuring agents, are a type of energy that can absorb certain wavelengths in the ultraviolet region (250-420nm) or visible region (400-800nm) to generate free radicals, cations, etc., thereby initiating monomer Polymerization crosslinks cured compounds.What is a photoinitiator?In the photocuring system, including UV glue, UV coating, UV ink, etc., after receiving or absorbing external energy, it undergoes chemical changes and decomposes into free radicals or cations, thereby initiating polymerization.All substances that can generate free ra
As early as 1780, the Swedish chemist Sheele discovered lactic acid from waste milk; the production of lactic acid by fermentation originated from the natural fermentation of Boutron and Fremy in 1941; the industrial production of lactic acid by pure fermentation was started by Charles E. Avery in 1881. began; and large-scale industrial production of L-lactic acid was formed in the early 1990s.
x

Soumis avec succès

nous vous contacterons dès que possible

Fermer