Maleic Anhydride (Briquettes, Pastilles)-manufacture,factory,supplier from China

(Total 24 Products for Maleic Anhydride (Briquettes, Pastilles))
Products Description of Trifluoromethanesulfonic anhydride CAS#358-23-6Trifluoromethanesulfonic anhydride is an organic compound with the chemical formula (CF3SO2)2O.
Contacter maintenant
Products Description of CIS-BUTENEDIOIC ANHYDRIDE CAS#108-31-6Maleic anhydride, also known as "maleic anhydride", is the anhydride of maleic acid. It is a colorless or white solid with a sour taste at room temperature, with a molecular formula of C4H2O3. Molecular weight 98.06. Needle-shaped crystals are obtained from chloroform or ether. Melting point 60℃, boiling point 82℃ (1.8665kPa), relative density 1.31460. Soluble in acetone, chloroform, ether, slightly soluble in petroleum ether.
Contacter maintenant
Products Description of CIS-BUTENEDIOIC ANHYDRIDE CAS#108-31-6Maleic anhydride, also known as "maleic anhydride", is the anhydride of maleic acid. It is a colorless or white solid with a sour taste at room temperature, with a molecular formula of C4H2O3. Molecular weight 98.06. Needle-shaped crystals are obtained from chloroform or ether. Melting point 60℃, boiling point 82℃ (1.8665kPa), relative density 1.31460. Soluble in acetone, chloroform, ether, slightly soluble in petroleum ether.
Contacter maintenant
Products Description of Octenyl succinic anhydride CAS#26680-54-62-Octenylsuccinic anhydride (OSA) is an important intermediate of fine chemicals. Because its molecule contains carbon-carbon double bonds and carboxylic acid ligands, it has high chemical reactivity. Under appropriate conditions, it can undergo a series of reactions such as addition, substitution, reduction, acetification, hydrolysis and polymerization. It can synthesize a variety of derivatives.
Contacter maintenant
Products Description of Phthalic Anhydride CAS#85-44-9Phthalic anhydride, referred to as phthalic anhydride, is an important chemical raw material.
Contacter maintenant
1,4-Benzenedicarboxylic Acid, Compds. With Polyisobutenyl Succinic Anhydride-Tetraethylenepentamine Reaction Products CAS:68909-40-0Good dispersibility: It can be effectively dispersed in various solvents and matrices, which helps to improve the uniformity and stability of the product. Excellent thermal stability: It can maintain its stable performance at higher temperatures and is suitable for some high-temperature application scenarios.
Contacter maintenant
Products Description of 1,8-Naphthalic anhydride CAS#81-84-5It precipitates needle-shaped crystals in ethanol and rhombus-shaped crystals in acetic acid.
Contacter maintenant
Products Description of 2-DODECEN-1-YLSUCCINIC ANHYDRIDE CAS#26544-38-7Yellow liquid2-DODECEN-1-YLSUCCINIC ANHYDRIDE Chemical PropertiesMelting point 41-43 °C(lit.)Boiling point 180-182 °C5 mm Hg(lit.)density 1.00 g/mL at 20 °Cvapor density 9.2 (vs air)vapor pressure <1 mm Hg ( 20 °C)refractive index 1.477-1.479Fp 352 °Fstorage temp. Inert atmosphere,Room Temperaturesolubility 10g/L in organic solvents at 20 ℃form clear liquid to cloudy liquidcolor Light yellow to Yellow to OrangeWater Solubility&
Contacter maintenant
2-DODECEN-1-YLSUCCINIC ANHYDRIDE CAS#19780-11-1Product Name:2-DODECEN-1-YLSUCCINIC ANHYDRIDESynonyms:2,5-Furandione, 3-(2-dodecenyl)dihydro-;2,5-Furandione, 3-dodecenyl-;3-(2-dodecenyl)dihydro-5-furandione;3-[(2E)-2-Dodecenyl]dihydro-2,5-furandione;3-(2-dodecenyl)succinic anhydride;2-(2-Dodecene-1-yl)succinic anhydride;2-(2-Dodecenyl)succinic anhydride;2-Dodecen-1-yl(-)succinicanhydridCAS:19780-11-1MF:C16H26O3MW:266.38EINECS:243-296-9Product Categories:Carbonyl Compounds;Carboxylic Acid Anhydrides;Organic Building Blocks;Anhydride MonomersUnsaturated fatty acids and derivatives;Monoenoic fatty
Contacter maintenant
2-Octen-1-ylsuccinic anhydride, mixture of cis and trans Chemical PropertiesMelting point 8-12°C (lit.)density 1 g/mL at 25 °C(lit.)vapor pressure 43.5Pa at 20℃refractive index n20/D1.4694(lit.)Fp 113℃form Viscouscolor Colorless to Almost colorlessBoiling point 168°C/10 mmHg(lit.)LogP4.68 at 22℃ and pH7EPA Substance Registry System2,5-Furandione, dihydro-3-(2-octenyl)- (42482-06-4)Safety InformationHazard Codes XiRisk Statements 36/38Safety Statements 26-36WGK Germany 3HS Code 29171900Factory and Equipment ShowFast delivery timeI
Contacter maintenant
 Polymaleic Acid CAS#26099-09-2 Polymaleic acid is the homopolymer of maleic acid. It is very secure in presence of chlorine and different oxidizing biocides. It has correct scale inhibition and excessive temperature resistance properties. Therefore, it can be used in the water desalination plants. It is also an amazing calcium carbonate antiscalant upon excessive temperature and in the excessive alkaline cooling water systems.
Contacter maintenant
Products Description of Di-tert-butyl Dicarbonate CAS#24424-99-5BOC anhydride is an organic compound with the molecular formula C10H18O5.
Contacter maintenant
Products Description of Boric acid CAS#11113-50-1Boric acid is also called "orthoboric acid". It is derived from the interaction between natural borax (sodium borate) and acid. Soluble in water, ethanol and glycerin. The aqueous solution is acidic and is a monovalent weak acid. Solubility in water increases with temperature. Heated to 169℃ (±1℃), dehydration will produce metaboric acid, and 300℃ will form boric anhydride. Neutralize with strong base to obtain metaborate.
Contacter maintenant
Products Description of 1-Methylpiperazine CAS#109-01-3Colorless liquid. Boiling point 138℃ (140℃), relative density 0.903 (20/4℃), refractive index 1.4378, flash point 42℃, soluble in water, ether, ethanol, miscible with water, methanol, etc.
Contacter maintenant
Products Description of Isopropyl palmitate CAS#142-91-6Isopropyl palmitate is a traditional, refreshing, fast-spreading emollient used in modern cosmetics. It is used as the main carrier or conditioning ingredient in a wide range of cosmetic applications.
Contacter maintenant
Products Description of Polyisobutylene CAS#9003-27-4Potassium sulfate (K2SO4) is a kind of chemical compounds that is commonly used in agriculture. The dominant application of potassium sulfate is as a fertilizer, which is commonly applied to offer both potassium and sulfur, thus improving the quality and yield of crops growing in soils that lack an adequate supply of this essential elements. Besides, the crude potassium sulfate is sometimes employed in the production of glass.
Contacter maintenant
Products Description of Polyisobutylene CAS#9003-27-4Ammonium Chloride (CAS#12125-02-9) is a white crystalline salt that is highly soluble in water, with a solubility of 37.2 g/100 g at 20°C. It is a crucial component in agricultural fertilizers, providing essential nitrogen for plant growth. This compound is also used as a feed additive and in various industrial applications due to its versatility. In agriculture, Ammonium Chloride is valued for its ability to enhance soil fertility and promote robust plant development.
Contacter maintenant
Products Description of Tetrabutylammonium hydrogen sulfate CAS#32503-27-8Tetrabutyl quaternary ammonium salts are phase transfer catalysts with superior performance. Tetrabutylammonium hydrogen sulfate buffer salt system is often used as an aqueous mobile phase in reversed-phase liquid chromatography detection. However, the stability of the tetrabutylammonium hydrogen sulfate buffer salt system gradually decreases with the increase of tetrabutylammonium hydrogen sulfate concentration.
Contacter maintenant
Products Description of Copper(II) sulfate CAS#7758-98-7 Copper sulfate is an inorganic compound. The inorganic industry uses it to make other copper salts such as cuprous chloride, cupric chloride, copper pyrophosphate, cuprous oxide, copper acetate, copper carbonate, etc. The common form of copper sulfate is crystals. Anhydrous copper sulfate is a white crystalline powder, which may also be light gray-green due to impurities. It is a soluble copper salt. The relative density is 3.603, and the solubility in water at 25°C is 23.05g.
Contacter maintenant
Butylated Hydroxytoluene CAS#128-37-0Aluminium Sulfate (CAS#16828-11-8), also known as Alum, is a white crystalline compound widely recognized for its effectiveness in water purification and its versatility in various industrial applications.
Contacter maintenant
Products Description of AzuleneCAS#275-51-4Aurobinol is a structural isomer of naphthalene, which appears as small blue leaves or monoclinic flaky crystals with the smell of naphthalene. It is soluble in general organic solvents but insoluble in water.
Contacter maintenant
Products Description of 3,4-Dimethoxythiophene CAS#51792-34-83,4-Dimethoxythiophene is an organic compound with the molecular formula C6H8O2S.3,4-Dimethoxythiophene Chemical PropertiesBoiling point 100-102 °C/10-11 mmHgdensity 1.209 g/mL at 25 °Crefractive index 1.5409Fp 224 ºFstorage temp. -20°Cform powder to lump to clear liquidcolor White or Colorless to YellowWater Solubility Miscible with organic solvents.
Contacter maintenant
Products Description of Sodium hydrosulfideCAS#16721-80-5Sodium hydrosulfide is used in the dye industry to synthesize organic intermediates and as an auxiliary agent for preparing sulfur dyes, in the leather industry to dehair and tan leather, in the fertilizer industry to remove monomer sulfur in activated carbon desulfurizers, in the mining industry to be used in large quantities for copper ore dressing, in the production of artificial fibers for sulfite dyeing, etc.
Contacter maintenant
Product Overview: Industrial-Grade Acetic AcidIntroducing our high-quality Acetic acid mass CAS#64-19-7, a versatile chemical solution designed to meet the needs of manufacturers and industrial users worldwide. Known for its effective properties and stable quality, this product serves as an essential building block across various applications in numerous industries.Pure Acetic Acid:Our Pure Acetic Acid, with the chemical formula CH3COOH, is meticulously produced to ensure the highest level of purity.
Contacter maintenant
Relate News
Breaking News: Glycerin Market Projected to Reach US$ 3.2 Billion by 2032The global glycerin market is experiencing significant growth, with IMARC Group's recent report predicting the market to reach US$ 3.2 Billion by 2032, exhibiting a CAGR of 4.9% during 2024-2032 .
Propylene Glycol Market Projected to Witness Robust Growth Amid Increasing Industrial ApplicationsThe global propylene glycol market is forecasted to exhibit a resilient expansion, with a compound annual growth rate (CAGR) of 6.1% from 2023 to 2030, reaching a valuation of USD 6.98 billion by 2030, according to a recent report by Grand View Research .
Sericin protein is a natural macromolecular protein wrapped on the surface of silk fibroin. It is mainly secreted by the silk glands of silkworms and is one of the main proteins that make up the silkworm cocoon.
What is Cornmint Oil?Cornmint oil is a colorless or light yellow clear liquid. It has a special refreshing fragrance, which is pungent at the beginning and cool afterwards. After long-term storage, the color becomes darker. It is often used to repel mosquitoes and relieve physical fatigue.Legend has it that the original name of mint comes from Greek mythology. Pluto Hades fell in love with the beautiful Elf Mansi, and Pluto’s wife Persephane was very jealous.
Dextran refers to a homopolysaccharide composed of glucose as a monosaccharide. The difference in the length of the dextran chain determines its different medicinal value. Long-chain dextran is usually a blood volume expansion drug with a molecular weight of tens of thousands to hundreds of thousands; while short-chain dextran can be complexed with ferric hydroxide , made of iron dextran, that is, iron dextran.What is Dextran?Dextran is a high-molecular glucose polymer synthesized from sucrose catalyzed by dextran sucrase (dextransucrase EC2.4.1.5) produced by Leuconostocmesenteroides.
Niacinamide, also called nicotinamide, is an amide substance of niacin. White crystalline powder; odorless or nearly odorless, bitter in taste; slightly hygroscopic. Soluble in water or ethanol, soluble in glycerol.Because nicotinamide is a B vitamin derivative, as well as nicotinamide is additionally a component of coenzymes, it is an essential part of the body as a coenzyme of several dehydrogenases.
Photoinitiators, also known as photosensitizers or photocuring agents, are a type of energy that can absorb certain wavelengths in the ultraviolet region (250-420nm) or visible region (400-800nm) to generate free radicals, cations, etc., thereby initiating monomer Polymerization crosslinks cured compounds.What is a photoinitiator?In the photocuring system, including UV glue, UV coating, UV ink, etc., after receiving or absorbing external energy, it undergoes chemical changes and decomposes into free radicals or cations, thereby initiating polymerization.All substances that can generate free ra
The sugar that people often eat in daily life is extracted from sugarcane, sugar beet and other plants. There are also some substances in the plant kingdom that are sweeter than sucrose. Stevia, native to South America, is 200 to 300 times sweeter than sucrose; the West African bamboo skewers in the tropical forests of Africa are 3000 times sweeter than sucrose; there is also a vine plant of Dioscorea nigra with the sweetness of the fruit. 90,000 times that of sucrose.However, these substances, which are thousands of times sweeter than sucrose, are rarely seen.
cas 31075-24-8 IntroductionMayosperse 60 is a chemical compound with the CAS#31075-24-8. It is a widely used dispersant in the chemical industry, especially in the field of coatings and paints. In this article, we will explore the properties and applications of Mayosperse 60.cas 31075-24-8 PropertiesMayosperse 60 is a high-performance dispersant with excellent stability and compatibility. It is a low viscosity liquid with a light yellow color. Its molecular weight is about 4000, and it has a hydrophobic tail and a hydrophilic head.
Dimethyl Disulfide (DMDS) Industry Sees Growing Demand Amidst Industrial Expansion[City, State] – [Date] – The global dimethyl disulfide (DMDS) market is experiencing significant growth, driven by the increasing demand from various industries.
x

Soumis avec succès

nous vous contacterons dès que possible

Fermer